Ordinary Discount Cylinder Head Gasket Material - FBYS411 Non asbestos sealing sheet – Ishikawa
Ordinary Discount Cylinder Head Gasket Material - FBYS411 Non asbestos sealing sheet – Ishikawa Detail:
Features
Excellent temperature resistance
Good processing and adaptability
Can be used as an alternative to flexible graphite plates
Can be made into a sprint composite board
Asbestos-free confirmation and ROHS certification by a third party
Product use
Recommended for automotive, general purpose exhaust end sealing liner materials
Rules
Sheets: length ≤1150mm,width ≤1150mm, thickness 0.5 to 2.0mm
Special specifications can be agreed with the customer
Physical performance
|
Test conditions |
Pilot project |
Standard |
|
100°C×1h 。 |
The horizontal stretch strength Mpa≥ |
2.0。 |
|
100°C×1h 。 |
Dense g/cm3 |
1.0±0.1 。 |
|
100°C×1h 。 |
The rate of contraction % |
40±7 。 |
| Rebound rate % % |
6。 |
|
|
550°C×1h 。 |
Burn loss % % |
35。 |
|
100°C×22h 。 |
Creep relaxation rate % %≤ |
30。 |
|
Distilled water. |
The thickness change rate %≤ |
15。 |
| Weight change rate %≤ |
45。 |
|
|
Water : glycol is 1:1 100°C×5h 。 |
The thickness change rate %≤ |
15。 |
| Weight change rate %≤ |
60。 |
|
|
ASTM FUEL B。 |
The thickness change rate %≤ |
10。 |
| Weight change rate %≤ |
45。 |
|
|
IRM 903 s standard oil |
The thickness change rate %≤ |
15。 |
| Weight change rate %≤ |
50。 |
|
|
Heat-resistant aging |
The rate of contraction % |
30±7 。 |
| Rebound rate % % |
30。 |
|
| The thickness change rate %≤ |
0±5 。 |
|
| Weight change rate %≤ |
0±3 。 |
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for Ordinary Discount Cylinder Head Gasket Material - FBYS411 Non asbestos sealing sheet – Ishikawa, The product will supply to all over the world, such as: Nigeria, Albania, Senegal, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Phoebe from Egypt - 2018.12.22 12:52
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Erin from UAE - 2017.09.30 16:36
